Â鶹´«Ã½

 

Design Guidelines

Ìý

Â鶹´«Ã½ Design Guidelines provide assistance to consultants during the planning, and design phases of the University’s expansion and renovations. ÌýThe Guidelines do not relieve a consultant from any professional responsibility, duty or due diligence to design elegant, functional, efficient and low maintenance facilities.

Facility owners have preferred materials and requirements that make the task of maintaining facilities less costly.Ìý Â鶹´«Ã½ understands this is a balance between capital and operating costs.Ìý The Guidelines are not intended to be the only acceptable solution.Ìý Â鶹´«Ã½ expects consultants to bring modern and innovative ideas, materials and methods to the University.Ìý If these Guidelines do not allow these new ideas then the consultant is to make a request in writing to the Â鶹´«Ã½ Project Manager for an exception to the guidelines.Ìý Necessary reasoning and or calculations shall accompany the request.Ìý The exception request will be reviewed internally and either rejected or accepted.Ìý The consultant will document this rationale and/or justification for each exception in the Basis of Design.Ìý The University Guidelines may be updated subsequently.

These documents provide design guidelines only, and are not intended for use, in whole or in part, as a specification. Do not copy the guidelines verbatim in specifications or in notes on drawings. Refer questions and comments regarding the content and use of these documents to the Â鶹´«Ã½ Project Manager.Ìý The Guidelines are intended to be read in conjunction with the local codes and regulations, and in no way are to be considered as a code replacement. The codes and regulations represent the minimum acceptable standard. Where the technical design requirements differ from the building codes and other applicable codes and standards, the more stringent of the codes shall be applied.

Part 1Ìý Ìý Part 2

[PDF - 582 KB]



[PDF - 234KB]
ÌýÌýÌý Ìý

Division 1 -
General Requirements


[PDF -Ìý 1.3 MB]


[PDF - 282 KB]

Division 1 -
General Requirements - Commissioning (When in Scope of Work)


[PDF -171 KB]


[PDF - 216 KB]

)
[PDF - 209 KB]


[PDF - 161 KB]

Ìý



[PDF - 617 KB]



[DWG - 939 KB]



[CTB - 4 KB]

Ìý

Division 8 -
Openings


[PDF - 226 KB]

Item 3 - Life Cycle Standards -ÌýComing Soon!ÌýÌý

Ìý

Division 10 -
Specialties


[PDF - 2.4 MB]


[PDF - 662 KB]
Ìý

Division 14 -
Conveying Equipment


[PDF - 185 KB]
Ìý

Ìý

[PDF - 309 KB]
Ìý

Division 21 -
Fire Suppression


[PDF - 329 KB]


[PDF - 1.9 MB]
Ìý

Division 22 -
Plumbing


[PDF - 257 KB]

Ìý

[PDF - 2,569 KB]
Ìý Division 23 -
Heating, Ventilation and Air Conditioning



[PDF 662 KB]


[PDF - 1 MB]

[MS Word - 81 KB]
Ìý

Division 25 -
Integrated Automation



[PDF 1.4 MB]


[PDF - 1.4 MB]


[PDF - 851 KB]
Ìý

Division 26 -
Electrical


[PDF - 1.3 MB]

)
[PDF - 2.2 MB]
Ìý

Division 27 -
Communications


[PDF - 8.2 MB]

Ìý Ìý

Division 28 -
Electronic Safety and Security


[PDF - 187 KB)


[PDF - 324 KB]


[PDF - 2.2 MB]


[PDF - 2.8 MB]

Ìý Ìý

Division 32 -
Exterior Improvements


[PDF - 3.9 MB]